Air flows in a circular cross-section duct with a velocity of 50 ft/s and a pressure of 85 psia at a section where the diameter is 4 in. At a downstream section, where the diameter has increased to 8 in. the pressure is 45 psia. (a) Assuming the flow to be isothermal, compute the heat transfer between the locations 0 (b) What is the amount of work done

On a average work day more than work place firs are reorted

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.