Engineering, 21.04.2020 15:34 catchonyet

1.The project should be submitted onCanvas.2.Include all files in one folder and compress your folder.3.Includes all the following files(Submission Checklist):A. The codeand the files necessary to compile and test the project. Don’t list the code in the word document. You must send the whole project. B.Test Plan: Showing how you tested the program (show the steps of your testing procedure along with screen shots). (10points)C. A short descriptionof the design plan and general comments. (5 points)Build Specifications (35points)Write a C++ program to manage a Car Dealership System. The main user is an employee at the dealership.

1. The system should load a catalogof all cars in the inventory, which includes newand oldcars. (includeat least5 new cars and 5 old cars).
2. A user can search the inventory: The user of the system can search the inventory by using the make of the car, model of the car, or by category(new or old cars).
3. A user can sell or leasenew and old cars.
4. A user can returna leased car into the inventory.
5. Add new and old cars into the inventory.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.

Answers: 1

Answer

Engineering, 06.07.2019 04:10

Consider a power plant with water as the working fluid that operates on an ideal rankine cycle. it has a net power output of 45mw. superheated steam enters the turbine at 7mpa and 500°c (h=3411.4 kj/kg; s=6.8 kj/kg k) and is cooled in the condenser at a pressure of 10 kpa by running cooling water from a lake through the tubes of the condenser at a rate of 2000 kg/s. (a) show the cycle on a t-s diagram (a right schematic is fine - you do not need to calculate the temperatures at each point); (b)-determine the work done by the turbine and the pump in kj/kg; (c)-the mass flow rate of water used by the power plant; (d)-the thermal efficiency of the cycle; (e)-the temperature rise of the cooling water. assume the cooling water is incompressible with cp 4.18 kj/kg°c.

Answers: 3

Answer

You know the right answer?

1.The project should be submitted onCanvas.2.Include all files in one folder and compress your folde...

Questions