subject
Engineering, 20.04.2020 21:04 Pizzapegasus1

A preheater involves the use of condensing steam at 100o C on the inside of a bank of tubes to heat air that enters at I atm and 25o C. The air moves at 5 m/s in cross flow over the tubes. Each tube is 1 m long and has an outside diameter of 10 mm. The bank consists of 196 tubes in a square, aligned array for which ST = SL = 15 mm. What is the total rate of heat transfer to the air? What is the pressure drop associated with the airflow?

(b) Repeat the analysis of part (a), but assume that the tubes have a staggered arrangement with ST = 15 mm and SL = 10 mm.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
question
Engineering, 04.07.2019 19:10
The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false
Answers: 2
You know the right answer?
A preheater involves the use of condensing steam at 100o C on the inside of a bank of tubes to heat...
Questions
question
Mathematics, 04.10.2020 14:01
question
Mathematics, 04.10.2020 14:01
question
Mathematics, 04.10.2020 14:01
Questions on the website: 13722363