Engineering, 17.04.2020 19:03 mel4245
Consider a metal rod that is 8.894 mm in diameter and 4.952 m in length. The elastic modulus for this type of material is 112 GPa. A tensile load of 66,523 N is applied to the rod. Assuming that the material behaves elastically under this load.
(a) Calculate the length (in the unit of meter) of the rod under this load. Please keep three decimal with your answer, i. e., your answer should be in the format of x. xxx. Please do not include units in your answer.
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
Consider a metal rod that is 8.894 mm in diameter and 4.952 m in length. The elastic modulus for thi...
Social Studies, 21.02.2021 15:40
Social Studies, 21.02.2021 15:40
Mathematics, 21.02.2021 15:40
Social Studies, 21.02.2021 15:40
English, 21.02.2021 15:40
Mathematics, 21.02.2021 15:40
Advanced Placement (AP), 21.02.2021 15:40
Business, 21.02.2021 15:40
Spanish, 21.02.2021 15:40
Mathematics, 21.02.2021 15:40
Mathematics, 21.02.2021 15:40
German, 21.02.2021 15:40
Mathematics, 21.02.2021 15:40