![subject](/tpl/images/cats/User.png)
Engineering, 17.04.2020 03:10 Benitez0212
Use Manning's equation to analyze flow in a gutter along a 6-inch high vertical curb. The longitudinal slope of the gutter is 1%, z is 24, and Manning’s n is 0.016. (a) What is the maximum discharge that the gutter can carry during a storm event without the water overtopping the curb? (b) For this case, how far does the water encroach onto the roadway? (this is the top width) (c) The maximum top width allowed for design is 9 ft (so the water fills a parking lane but does not encroach onto the travel lanes of the road). Determine the water depth and design discharge for this case. (d) Design codes often suggest using the following equation instead of Manning’s equation. Sx is the gutter cross-slope, which is 1/z. = 0.56 ( 1 nSx ) S 1/2y 8/3 Redo part (c) of this question using this alternative equation. Compare your answers. Which equation provides a more conservative design approach? Explain your answer.
![ansver](/tpl/images/cats/User.png)
Answers: 1
![](/tpl/images/ask_question.png)
![](/tpl/images/ask_question_mob.png)
Another question on Engineering
![question](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
![question](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
![question](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
![question](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:20
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
You know the right answer?
Use Manning's equation to analyze flow in a gutter along a 6-inch high vertical curb. The longitudin...
Questions
![question](/tpl/images/cats/mat.png)
Mathematics, 18.02.2020 11:33
![question](/tpl/images/cats/mat.png)
Mathematics, 18.02.2020 11:34
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/biologiya.png)
Biology, 18.02.2020 11:36
![question](/tpl/images/cats/obshestvoznanie.png)
Social Studies, 18.02.2020 11:36
![question](/tpl/images/cats/health.png)
![question](/tpl/images/cats/en.png)
English, 18.02.2020 11:40
![question](/tpl/images/cats/mat.png)
Mathematics, 18.02.2020 11:40
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/mat.png)
Mathematics, 18.02.2020 11:43
![question](/tpl/images/cats/ekonomika.png)
![question](/tpl/images/cats/istoriya.png)
![question](/tpl/images/cats/istoriya.png)
History, 18.02.2020 11:43
![question](/tpl/images/cats/mat.png)
![question](/tpl/images/cats/mat.png)
Mathematics, 18.02.2020 11:49
![question](/tpl/images/cats/himiya.png)
Chemistry, 18.02.2020 11:51
![question](/tpl/images/cats/himiya.png)
![question](/tpl/images/cats/obshestvoznanie.png)
Social Studies, 18.02.2020 11:54
![question](/tpl/images/cats/biologiya.png)
Biology, 18.02.2020 11:54
![question](/tpl/images/cats/mat.png)
Mathematics, 18.02.2020 11:54