Engineering, 16.04.2020 02:08 Lovergirl13
A beam has a rectangular cross section that is 5 inches wide and 1.5 inches tall. The supports are 60 inches apart and with a 125 lb person standing in the middle of the beam and it deflects .15 in.
Find the modulus of elasticity
Find the beam deflection
Answers: 2
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
A beam has a rectangular cross section that is 5 inches wide and 1.5 inches tall. The supports are 6...
Mathematics, 14.12.2020 22:00
Spanish, 14.12.2020 22:00
Mathematics, 14.12.2020 22:00
Mathematics, 14.12.2020 22:00
Mathematics, 14.12.2020 22:00
Chemistry, 14.12.2020 22:00
SAT, 14.12.2020 22:00