A precision parts manufacturer produces bolts for use in military aircraft. The specifications for bolt length are 37.50 plus/minus 0.25 cm. The company has established an x-bar chart and an R-chart using samples of size five. The center lines for the x-bar chart and R-chart are set at 37.35 cm and 1.05 cm, respectively. What is the value of Cpk for this process?

cpk = 0.03

Explanation:

Cpk is a process capability index used to measure the production capability of a process. Cpk does not use the assumption that the process mean is centered between the specification limits. Assuption of the Cpk is based that the measurements are normally distributed. The formula of cpk is given as:

Where:

USL = upper bound, LSL = lower bound, μ = mean, σ = standard deviation

Given that:

The center lines for the x-bar chart and R-chart are set at 37.35 cm and 1.05 cm, Therefore, μ = 37.35 cm and σ = 1.05 cm

The specifications for bolt length are 37.50 ± 0.25 cm

USL = 37.5 + 0.25 = 37.75 cm

LSL  = 37.5 - 0.25 = 37.25 cm

Substituting:

cpk = 0.03

jesus loves you

explanation:

answer:

the army does care about its soilders sir i think yout getting off on the wrong foot sir you need to respect our country were keeping the peole that want to d harm towards you out. so dont go saying we don't care cause we do