subject
Engineering, 15.04.2020 22:48 justaguy15

A distillation column with a total condenser and partial reboiler is separating acetone and ethanol (equilibrium data is provided in the table below). The feed is 70 mole% acetone, flows at 1000 mol/h, and is a superheated vapor for which one mole of liquid must be vaporized on the feed plate to cool four moles of feed. We desire a bottoms composition of 5 mole% acetone and a distillate composition of 90 mole% acetone. The column operates at 1 atm. The equilibrium data is given in the table below. Answer the following questions. a) What is the minimum number of stages needed for this separation (i. e. total reflux)?b) What is the minimum reflux ratio?c) If R = 2Rmin, find the optimal feed stage and the number of stages if the column efficiency is 75%.Acetone-Ethanol Equilibrium Data at 1 atm in terms of Acetone concentrations:col1 xA 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.5 0.6 0.7 0.8 0.9 1.0col2 yA 0.262 0.348 0.417 0.478 0.524 0.566 0.605 0.674 0.739 0.802 0.865 0.929 1.0

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
You know the right answer?
A distillation column with a total condenser and partial reboiler is separating acetone and ethanol...
Questions
question
Mathematics, 19.08.2019 06:30
question
Mathematics, 19.08.2019 06:30
question
Mathematics, 19.08.2019 06:30
question
Mathematics, 19.08.2019 06:30
question
Mathematics, 19.08.2019 06:30
Questions on the website: 13722367