Draw the microstructure you would expect at room temperature if this 0.5 wt% C binary Fe-C alloy were slowly cooled to room temperature from 1100 C. Clearly label all phases in your drawing. Make sure you clearly indicate the eutectoid and proeutectoid phases. You only need to draw one microstructure at room temperature.

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.