A company proposes to use a new coating to minimize fictional losses in Alaskan pipelines. In wholly turbulent model testing, the coating causes a reduction in pressure drop over a 10m pipe of diameter 0.2m. of 10Pa. What reduction in pressure drop should we expect this coating to result in if applied to a 10km long, 2m diameter pipe if operated at the same velocity as model

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.