subject
Engineering, 15.04.2020 02:10 allytrujillo20oy0dib

Ignore swell and shrinkage for this problem.
An excavator with a 5 cubic yard bucket has a cycle time of 33 seconds. The trucks you have available can be filled in 3 cycles of the excavator (trucks have 15 cubic yards capacity). The trucks take 5 minutes to haul, 45 seconds to dump, and 3 minutes to return to the excavator.
a. Find the number of trucks to balance the output of the excavator. Report your answer to at least 1 decimal place. You can assume 60 minute hours.
b. If you round up the number of trucks, what is the output per 60 minutes?
c. If you round the number of trucks down, what is the output per 60 minutes?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
question
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
You know the right answer?
Ignore swell and shrinkage for this problem.
An excavator with a 5 cubic yard bucket has a cy...
Questions
question
History, 20.10.2019 17:00
question
Mathematics, 20.10.2019 17:00
question
English, 20.10.2019 17:10
question
English, 20.10.2019 17:10
Questions on the website: 13722367