A displacement transducer has the following specifications Linearity error ±0.1% of reading, Drift ±0.15%/C of reading, sensitivity error ±0.25% of reading, excitation 10-25 V DC, output 0-5 V DC, range 0-5 cm. The output is to be indicated on a voltmeter with accuracy of ±0.15% of the reading and has a resolution of 10 µV. The system will be used at "room temperature" which can vary by as much as 5C. Estimate the design stage uncertainty in a 3.5 cm reading assuming 95% confidence. Read your book to learn more details about this.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79