Engineering, 14.04.2020 15:51 angieinthehouse45
A spur gearset has a pinion speed is 1120 rev/min. There are 17 teeth on the pinion and 51 teeth on the gear. The pressure angle is 20° and the overload factor Ko = 1. The diametral pitch is 6 teeth/in and the face width is 2 in. The pinion cycle life is to be 10^8 revolutions at a reliability R = 0.99. The quality number is 5. The material is a through-hardened steel, grade 1, with Brinell hardnesses of 232 core and case of both gears. For a design factor of 3, what is the capacity in HP of the pinion considering only bending. Use Ks=1.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
A spur gearset has a pinion speed is 1120 rev/min. There are 17 teeth on the pinion and 51 teeth on...
Questions
Mathematics, 24.07.2020 03:01
Mathematics, 24.07.2020 03:01
English, 24.07.2020 03:01
Mathematics, 24.07.2020 03:01
History, 24.07.2020 03:01
Computers and Technology, 24.07.2020 03:01
English, 24.07.2020 03:01
