subject
Engineering, 13.04.2020 03:38 summerjoiner

If you fraudulently obtain or use a disabled parking placard or license plate your illegally parked vehicle can be towed in the permit confiscated you may also be

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 19:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
question
Engineering, 06.07.2019 02:30
1in2 processor chip can be modelled as an isothermal plane wall of silicon, isothermal on both sides. the power input to the bottom of the plane wall, or the processing power of the chip, often called the thermal design power (tdp), is 100w. assume the periphery is adiabatic. the silicon is 400 microns thick. the temperature at the junction, or in this case on the bottom of the isothermal plane wall, is 85°c. what is the top surface temperature, assuming that the only mode of heat transfer is conduction
Answers: 1
question
Engineering, 06.07.2019 04:30
State two advantages and two disadvantages of interchangeability.
Answers: 3
question
Engineering, 06.07.2019 05:30
Design a quick return four bar mechanism that will have time ratio of tr 1: 1.25 . the output link should scan 60° angle for a full crank rotation . the length of output link is 5.0 em 1)-find the length of the other links and draw the mechanism .(write down your steps) 2)-does the mechanism satisfy the grashof's condition. 3)-find the max and min transmission angles over the range of motion using graphical technique
Answers: 2
You know the right answer?
If you fraudulently obtain or use a disabled parking placard or license plate your illegally parked...
Questions
question
Mathematics, 02.11.2020 23:50
question
Mathematics, 02.11.2020 23:50
question
Social Studies, 02.11.2020 23:50
Questions on the website: 13722367