Engineering, 11.04.2020 05:09 demetricejames
You're about to make a measurement with an oscilloscope when you find that the trace appears to be very weak on the screen. Which of the following controls would you adjust to make the trace appear brighter? A. The focus control B. The level control C. The intensity control D. The slope control
Answers: 3
Engineering, 04.07.2019 19:20
Determine (a) the maximum thermal efficiency of reversible power cycles operating between a hot reservoir at 1000°c and a cold reservoir at 200°c and (b) the maximum cops for reversible refrigeration and heat pump cycies, respectively, between 28°c and 14°c.
Answers: 1
Engineering, 04.07.2019 19:20
Amass-spring-viscous damper system of mass 3 kg has a frequency of 100 rad/s and is critically damped. its initial conditions are x(0)-3 mm and (0)-2.3 m/s. does the system overshoot its equilibrium position? prove your answer
Answers: 1
Engineering, 06.07.2019 05:10
The ivanpah solar thermal power plant cost $2.2 billion to build. the gross plant electric output is 392 mw, and the net output is 377 mw. the planned capacity factor was 27.4%, but the actual capacity factor in 2016 was 20.5%. at best the plant thermal efficiency appears to be 18%. in addition, for the daily startup process, the solar plant also burned 1.3x10^12 btu of natural gas in 2016. the cost of natural gas in 2016 was about $2.5 per million btu. assuming a levelized annual fixed charge rate of 7%, determine (a) the capital cost (c/kwh) and (b) the fuel cost (e/k wh) for the electricity in 2016.
Answers: 3
Engineering, 06.07.2019 05:10
When x = 10 ft, the crate has a speed of 20 ft/s which is increasing at 6 ft/s^2. determine the direction of the crate's velocity and the magnitude of the crate's acceleration at this instant.
Answers: 2
You're about to make a measurement with an oscilloscope when you find that the trace appears to be v...
Mathematics, 11.12.2019 22:31
Mathematics, 11.12.2019 22:31
Computers and Technology, 11.12.2019 22:31