Engineering, 10.04.2020 20:59 katier9407

Juice cocktail (1000 kg) needs to be pasteurized by heating it up from 20 C to 85 C and then hot filling it into the glass bottles. The Heating process is carried out in a counter-current heat exchanger using hot water entering the heat exchanger at 98 C and leaving the heat exchanger at 90 C. If the hot water flow rate is at 2 kg/s calculate (a) the flow rate of juice and (b) the amount of time needed to pasteurize the entire batch of juice cocktail (1000 kg). The specific heat of juice is 3.8 kJ/kg C and that of water is 4.2 kJ/kg C.

Question: Calculate the length of heat exchanger needed for this operation (as described in problem 2) if the inside radius of the inner stainless steel pipe is 4 cm with a thickness of 5 mm. The convective heat transfer coefficient on the juice side is 75 W/ m2 °C, thermal conductivity of stainless steel is 20 W/m C and convective heat transfer coefficient on the hot water side is 350 W/m2 C (10). You are required to use all three heat transfer coefficient values while solving the problem.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

You know the right answer?

Juice cocktail (1000 kg) needs to be pasteurized by heating it up from 20 C to 85 C and then hot fil...

Questions