Engineering, 09.04.2020 18:14 manou76

Consider an infinite-span wing with a NACA 0006 airfoil section and a chord length of 1 m. The wing is at an angle of attack of 4°.

a. Estimate the wing lift and drag per unit span in airflow with velocity 50 m/s at standard sealevel conditions.
b. If the same wing is flying at an altitude 5 km with velocity 200 m/s, what is the lift per unit span?
c. Now consider a finite-span wing with the same profile, chord and attack angle flying at 5 km altitude with a speed of 50 m/s. The wing aspect ratio is 5, area is 5 m^2 , and span efficiency factor is 0.9. Determine the wing lift.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.

Answers: 1

Answer

You know the right answer?

Consider an infinite-span wing with a NACA 0006 airfoil section and a chord length of 1 m. The wing...

Questions