Engineering, 08.04.2020 23:46 kkcheers16

Using the example above, you need to write the actual problem statement for the problem presented below, which would be the part that begins with: “The goal of this project is…”
Then, you are going to determine 5 “customer needs” that must be considered for anyone trying to come up with a solution to the mosquito problem below.

Design Problem: - Non-Chemical way to Kill Mosquitoes in swamps
Problem Description:
Here in South Carolina, Mosquitoes are a nuisance because of the prevalence of standing water in swamps. While it is possible to use chemicals to treat the water and kill the mosquito larvae, these chemicals have been found to kill bees, which are essential to farms and are rapidly becoming an endangered species. The goal of this project is .

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Answers: 3

Answer

You know the right answer?

Using the example above, you need to write the actual problem statement for the problem presented be...

Questions