Engineering, 08.04.2020 05:07 chickennbutt0730
C. For a constant load power of 700 kW, write a MATLAB script to plot the terminal current as a function of field current. For your plot , let the field current vary between a minimum value corresponding to a machine loading of 825 kVA, leading power factor, and a maximum value corresponding to a machine loading of 825 kVA, lagging power factor. What value of field current produces the minimum terminal current
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
You know the right answer?
C. For a constant load power of 700 kW, write a MATLAB script to plot the terminal current as a func...
Questions
World Languages, 17.10.2019 13:00
Mathematics, 17.10.2019 13:00
History, 17.10.2019 13:00
Chemistry, 17.10.2019 13:00
English, 17.10.2019 13:00
Mathematics, 17.10.2019 13:00
Health, 17.10.2019 13:00
