subject
Engineering, 08.04.2020 04:30 densliverdensentos

A crude fermenter is set up in a shed in the backyard of a suburban house. Under anaerobic conditions with ammonia as the nitrogen source, about 0.45 g ethanol are formed per g glucose consumed. At steady state, the ethanol production rate averages 0.4 kg h21. The owner of this enterprise decides to reduce her electricity bill by using the heat released during the fermentation to warm water as an adjunct to the household hot water system. Cold water at 10C is fed into a jacket surrounding the fermenter at a rate of 2.5 litres h21. To what temperature is the water heated? Heat losses from the system are negligible. Use a biomass composition of CH1.75 O0.58 N0.18 plus 8% ash.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
question
Engineering, 04.07.2019 19:20
Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?
Answers: 1
You know the right answer?
A crude fermenter is set up in a shed in the backyard of a suburban house. Under anaerobic condition...
Questions
question
Engineering, 22.01.2021 03:20
question
Mathematics, 22.01.2021 03:20
Questions on the website: 13722360