Engineering, 08.04.2020 04:40 laureimaneaxel
Very thin films are usually deposited under vacuum conditions to prevent contamination and ensure that atoms can fly directly from the source to the depositing surface without being scattered along the way.
a. To get an idea of how few and far between the air molecules are in a thin-film deposition chamber, determine the mean free path of a generic "air" molecule with an effective diameter of 0.25 nm at a pressure of 1.5 x 10-6 Pa and temperature of 300 K.
b. If the chamber is spherical with a diameter of 10 cm, estimate how many times a given molecule will collide with the chamber before colliding with another air molecule.
c. How many air molecules are in the chamber (treating "air" as an ideal gas)?
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:20
Acompressor compresses a gas, a pump compresses a liquid. for a given pressure ratio, why does it take more work to compress a gas in a compressor than a liquid in a pump? a)- for a given pressure ratio the average specific volume for a gas is much higher than the average specific volume for a liquid. b)- there is no difference. the only difference is the amount of heat generated (not work) c)- for a given pressure ratio the average volurge for a gas is much higher than the average volume for a liquid. d)-there is no difference
Answers: 3
You know the right answer?
Very thin films are usually deposited under vacuum conditions to prevent contamination and ensure th...
Questions
Chemistry, 16.12.2019 18:31
Computers and Technology, 16.12.2019 18:31
Law, 16.12.2019 18:31
