subject
Engineering, 07.04.2020 21:26 JuanTorres7

A 0.6 m3 rigid tank initially contains refrigerant-134a in saturated vapor form at 0.9 MPa . As a result of heat transfer from the refrigerant, the pressure drops to 260 kPa . Use TESTCalc to answer the following questDetermine:
(a) Draw T-v and p-v diagrams
(b) The final pressure and temperature.
(c) The final volume of the refrigerant inside the piston-cylinder device. (d) The work has done during the process.
(e) The heat rejected from the refrigerant to reach its final state.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
You know the right answer?
A 0.6 m3 rigid tank initially contains refrigerant-134a in saturated vapor form at 0.9 MPa . As a re...
Questions
question
Chemistry, 06.09.2020 03:01
question
Mathematics, 06.09.2020 03:01
question
English, 06.09.2020 03:01
question
Mathematics, 06.09.2020 03:01
Questions on the website: 13722366