subject
Engineering, 07.04.2020 19:10 binkyv15

Given a velocity field with u = 2y and v = x^2 ,find:

(a) Equations for streamline passing through points (0,0) and (0,1)
(b) Plot several streamlines in all 4 quadrants along with directions
(c) What is the relationship between these Streamlines to the Stream Function (written)?
(d) What is the velocity potential for this flow
(e) Does the flow satisfy conservation of mass everywhere?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
question
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
question
Engineering, 04.07.2019 18:20
Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg
Answers: 2
You know the right answer?
Given a velocity field with u = 2y and v = x^2 ,find:

(a) Equations for streamline pass...
Questions
question
Mathematics, 05.03.2021 01:20
question
Mathematics, 05.03.2021 01:20
question
Mathematics, 05.03.2021 01:20
question
English, 05.03.2021 01:20
question
Social Studies, 05.03.2021 01:20
question
Mathematics, 05.03.2021 01:20
question
Mathematics, 05.03.2021 01:20
question
Mathematics, 05.03.2021 01:20
question
Mathematics, 05.03.2021 01:20
question
Mathematics, 05.03.2021 01:20
Questions on the website: 13722359