Engineering, 04.04.2020 14:36 kiarasanchez17
A 2-m3 rigid tank initially contains air at 100 kPa and 22oC. The tank is connected to a supply line through a valve. Air is flowing in the supply line at 600 kPa and 22oC. The valve is opened, and air is allowed to enter the tank until the pressure in the tank reaches the supply line pressure, at which point the valve is closed. A thermometer placed in the tank indicates that the air temperature at the final state is 77oC. Determine (a) the mass of air that has entered the tank and (b) the amount of heat transfer. [R=0.287 kPa. m3/kgK]
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
You know the right answer?
A 2-m3 rigid tank initially contains air at 100 kPa and 22oC. The tank is connected to a supply line...
Questions
Mathematics, 23.08.2019 05:00
Geography, 23.08.2019 05:00
Biology, 23.08.2019 05:00
Social Studies, 23.08.2019 05:00
Arts, 23.08.2019 05:00
Mathematics, 23.08.2019 05:00
Mathematics, 23.08.2019 05:00
