(A) Develop the activity sequence model and determine the normal time for the following work activity:
An assembly worker on a production line obtains an Allen key within reach, positions it 15 cm (6 in) onto a bolt head, cranks it 7 times to seat the bolt, and then sets the key aside.
(B) Express the MTM-1 motion elements in (a) as one or more MOST activity sequence models with index numbers.
(i) Determine the normal times in TMUs for these sequence activity models.
(ii) What is the total time for this (these) sequence activity model(s) in secs?

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false