Engineering, 04.04.2020 13:03 meowmeowcow

Consider a two-dimensional, laminar flow around a circular cylinder. Using Thwaites' correlation method, determine the separation angle for these two different velocity distributions given below. (a) From potential flow, the velocity distribution is given by, = 2Uo sin(%) U (x) 2Uo sin () (b) From actual experimental measurements by Hiemenz, the velocity distribution is given by, U (x) U(1.814f - 0.271f3 - 0.0471f5) In the equations above, Uo is the free-stream velocity, R is the radius of the cylinder, x is the arc length along the cylinder's surface, and 2 = x/R is the dimensionless arc length.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?

Answers: 2

Answer

Engineering, 04.07.2019 18:20

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

Answer

You know the right answer?

Consider a two-dimensional, laminar flow around a circular cylinder. Using Thwaites' correlation met...

Questions