Engineering, 04.04.2020 06:56 abalth8463

Hot water at 50 ℃ is routed from one building in which it is generated to an adjoining building in which it is used for space heating. Transfer between the buildings occurs in a steal pipe (k = 60W/m ∙ K) of 100-mm outside diameter and 8-mm wall thickness. During the winter, representative environmental conditions involve air at T[infinity] = −5℃ and V = 3m/s in cross flow over the pipe. Account for the convection resistance associated with water flow at a mean velocity of um = 0.5m/s in the pipe. What is the heat loss per unit length of pipe?

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 19:20

List 3 options on how to reduce knocking problens during engine process,

Answers: 2

Answer

You know the right answer?

Hot water at 50 ℃ is routed from one building in which it is generated to an adjoining building in w...

Questions