Engineering, 04.04.2020 03:01 countryboy42
Build an equivalent full-adder using two half-adders as building blocks along with a minimal number of additional gate(s) if needed. Show the gate schematic.
Answers: 2
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20
Air flows over a heated plate à t a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
Build an equivalent full-adder using two half-adders as building blocks along with a minimal number...
Mathematics, 26.04.2021 21:50
Physics, 26.04.2021 21:50
Mathematics, 26.04.2021 21:50
Mathematics, 26.04.2021 21:50
Chemistry, 26.04.2021 21:50
Business, 26.04.2021 21:50
Chemistry, 26.04.2021 21:50
Mathematics, 26.04.2021 21:50
Mathematics, 26.04.2021 21:50
Mathematics, 26.04.2021 21:50
Mathematics, 26.04.2021 21:50
Mathematics, 26.04.2021 21:50
Mathematics, 26.04.2021 21:50