subject
Engineering, 04.04.2020 01:57 tyrique86

A 5 ft thick layer of fill soil will be placed over a 20 ft thick Normally Consolidated CL layer to serve as a pad for construction of a new building. The fill is to be placed to an average dry unit weight of 113pcf with average water content of 15%. Thesaturated unit weight of the CL soil is 105.8 pcf. Determine the stress increase at Point A due to placement of the fill soil. Assume the lateral extent of the fill soil is much wider than the CL soil is thick.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
You know the right answer?
A 5 ft thick layer of fill soil will be placed over a 20 ft thick Normally Consolidated CL layer to...
Questions
question
Mathematics, 23.01.2021 01:00
question
Mathematics, 23.01.2021 01:00
question
Health, 23.01.2021 01:00
Questions on the website: 13722363