Engineering, 03.04.2020 17:01 Vetinthemaking21
A specimen of a 4340 steel alloy with a plane strain fracture toughness of 54.8 MPa (50 ksi ) is exposed to a stress of 1285 MPa (186400 psi). Assume that the parameter Y has a value of 1.07. (a) If the largest surface crack is 0.6 mm (0.02362 in.) long, determine the critical stress σc.
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
A specimen of a 4340 steel alloy with a plane strain fracture toughness of 54.8 MPa (50 ksi ) is exp...
Mathematics, 02.06.2021 01:00
Mathematics, 02.06.2021 01:00
Mathematics, 02.06.2021 01:00
Geography, 02.06.2021 01:00
Mathematics, 02.06.2021 01:00
Chemistry, 02.06.2021 01:00
English, 02.06.2021 01:00
Computers and Technology, 02.06.2021 01:00
History, 02.06.2021 01:00
Mathematics, 02.06.2021 01:00