Engineering, 02.04.2020 19:38 cassmoney94
A cylindrical rod of titanium is stressed elastically in tension. The original diameter was 15 mm and a force of 48 kN was applied. Compute the diameter of the rod upon loading, in millimeters.
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
A cylindrical rod of titanium is stressed elastically in tension. The original diameter was 15 mm an...
History, 09.11.2020 18:40
Mathematics, 09.11.2020 18:40
Health, 09.11.2020 18:40
Health, 09.11.2020 18:40
English, 09.11.2020 18:40
Computers and Technology, 09.11.2020 18:40
Physics, 09.11.2020 18:40
English, 09.11.2020 18:40
Biology, 09.11.2020 18:40