Engineering, 30.03.2020 21:27 randomh

Estimate the theoretical fracture strength of a brittle material if it is known that fracture occurs by the propagation of an elliptically shaped surface crack of length 0.15 mm and that has a tip radius of curvature of 0.002 mm when a stress of 1370 MPa is applied.

Answers: 2

Show answers

Answers

Answer from: elenadelfosse

The theoretical fracture strength of the brittle material is 11864.5 MPa

Explanation:

Fracture strength is the ability of a material to withstand fracture. It is also known as the breaking stress, it is the stress at which the material fails as a result of fracture. It usually determined from the stress-strain curve after performing a tensile test.

Given that:

Length (L) = 0.15 mm = 0.15 × 10⁻³ m

radius of curvature (r) = 0.002 mm = 0.002 × 10⁻³ m

Stress (s₀) = 1370 MPa = 1370 × 10⁶ Pa

theoretical fracture strength (s) = ?

The theoretical fracture strength is given as:

$s=s_{0} .\sqrt{\frac{L}{r} }$

Substituting values:

$s=1370*10^6 .\sqrt{\frac{0.15*10^{-3}}{0.002*10^{-3}} }\\s=1370*10^6 *8.66=11864.5*10^6\\s=11864.5*10^6$

s = 11864.5 MPa

The theoretical fracture strength of the brittle material is 11864.5 MPa

Answer from: robertobi1988

Theoretical fracture strength(σ) = 11,865 Mpa

Explanation:

We are given;

L = 0.15 mm

r = 0.002 mm

σ_o = 1370 MPa

Fracture strength, also known as breaking strength, is the stress at which a specimen fails via fracture. This is usually determined for a given specimen by a tensile test, which charts the stress–strain curve. The final recorded point is the fracture strength. However, it can be calculated theoretically as follows;

σ = σ_o√(L/r)

σ = 1370√(0.15/0.002) ≈ 11,865 Mpa

Answer from: Quest

answer: 500 wph.

explanation:

Answer from: Quest

the equation above shows how temperature f, measured in degrees fahrenheit, relates to a temperature c, measured in degrees celsius. based on the equation, which of the following must be true?

a temperature increase of 1 degree fahrenheit is equivalent to a temperature increase of

degree celsius.

a temperature increase of 1 degree celsius is equivalent to a temperature increase of 1.8 degrees fahrenheit.

a temperature increase of

degree fahrenheit is equivalent to a temperature increase of 1 degree celsius.

a) i only

b) ii only

c) iii only

d) i and ii only

Another question on Engineering

Engineering, 03.07.2019 14:10

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

Answer

Engineering, 03.07.2019 14:10

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

Answer

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

You know the right answer?

Estimate the theoretical fracture strength of a brittle material if it is known that fracture occurs...

Questions