Engineering, 30.03.2020 20:38 nerogravestones
Kinetic energy is negligible everywhere except at the diffuser inlet and the nozzle exit. On the basis of air-standard analysis, determine (a) the pressures, in kPa, and temperatures, in K, at each principal state. (b) the rate of heat addition to the air passing through the combustor, in kJ/s. (c) the velocity at the nozzle exit, in m/s.
Answers: 3
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12ยฐ, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Kinetic energy is negligible everywhere except at the diffuser inlet and the nozzle exit. On the bas...
English, 02.08.2019 15:00
Mathematics, 02.08.2019 15:00
Mathematics, 02.08.2019 15:00
Physics, 02.08.2019 15:00
Social Studies, 02.08.2019 15:00
History, 02.08.2019 15:00
History, 02.08.2019 15:00
Mathematics, 02.08.2019 15:00
Computers and Technology, 02.08.2019 15:00
English, 02.08.2019 15:00