Engineering, 30.03.2020 19:21 mandy9386

2. A thin vertical panel L = 3 m high and w = 1.5 m wide is thermally insulated on one side and exposed to a solar radiation flux of sun q′′ =750W/m2 on the other side. The exposed surface has an absorptivity of 0.87 α sun = for solar radiation; that is, 87% of the sun’s energy are absorbed whereas the other 13% are reflected. Assuming that the energy absorbed by the panel is dissipated by both natural convection and radiation (with a surrounding temperature of Tsur=300K, and a surface emissivity of εpanel = 0.85) into the surrounding quiescent air at atmospheric pressure and T[infinity] = 300 K, determine the surface temperature of the panel at steady state.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?

Answers: 3

Answer

You know the right answer?

2. A thin vertical panel L = 3 m high and w = 1.5 m wide is thermally insulated on one side and expo...

Questions