When buttons or switches are pressed by humans for arbitrary periods of time, we need to convert a signal level to a pulse. In the following FSM, whenever the input L goes from low to high, the level-to-pulse converter produces a single pulse P, which is one clock period wide. Thus it is a synchronous rising-edge detector. Write a Verilog HDL for the following FSM. L=0 L- Level to pulse 00 Low input, Waiting for risg P0 01 Edge Detected! P=1 / 11 High input, Waiting for fall P=0 LEO CLK converter 1:0NoteDiagram cannot be explained

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.