subject
Engineering, 27.03.2020 00:48 maddiiie128

A 14-lb crate is pulled up a frictionless 40° ramp with an initial velocity of v1=0.4 ft/s. It is pulled 0.3 ft from location #1 to #2 by a pulley system and a P=36-lb force pulling down on pulley A. Also, a spring (k=69 lb/ft) is attached
to the crate which is un-stretched at location #2. Assume the spring, cable, and pulleys are massless. Find the final velocity of the crate in ft/sat location #2.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
You know the right answer?
A 14-lb crate is pulled up a frictionless 40° ramp with an initial velocity of v1=0.4 ft/s. It is pu...
Questions
question
Mathematics, 07.12.2019 01:31
question
English, 07.12.2019 01:31
Questions on the website: 13722360