You are setting up instrumentation to measure the change in a signal at 1 kHz, but there are strong interfering signals at 60 Hz and 650-kHz. Select values of R, L, and C for a band-pass filter that will block the noise but allow the measurement signal to pass. What is the attenuation (i. e., reduction in voltage) of the measurement for your values of R, L, and C, at 60 Hz, 1 kHz, and 650 kHz?

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.