subject
Engineering, 25.03.2020 23:34 ramentome7542

Ayudenme!!
Cuál de las siguientes afirmaciones es verdadera: (V o F)

- El EPP será de material adecuado y tendrá el grado de protección necesario
- El trabajador no podrá utilizar más de un EPP a la vez, es incompatible.
- Una de las grandes ventajas del EPP es que se puede utilizar toda la vida, ya que no tienen fecha de caducidad.

Los Equipos de Protección Personal (EPP): (V o F)

- No están regulados por ninguna normativa.
- Pueden proteger a una parte concreta del cuerpo o garantizar una protección total.
- Es fundamental que estén bien diseñados, ya que esta característica es suficiente para garantizar que se pueden utilizar sin necesidad de informar al trabajador previamente.
- El EPP ofrece poca o ninguna protección si no se usa correctamente.

¿Cuál de las siguientes es una razón válida para no usar el EPP cuando
es requerido?

a. Usted está ocupado
b. Solo está haciendo un trabajo rápido
c. Es incómodo
d. Ninguna de las opciones anteriores

¿Cuál es el propósito de un casco?

a. Protegerlo de objetos que caen
b. Protegerlo de peligros por encima de su cabeza
c. La protección del oír
d. A y B

¿Cuál de las siguientes puede causar una lesión severa a los ojos si no
se usa la protección ocular adecuada?
a. Las partículas metálicas aéreas
b. Los clavos o puntillas
c. Los Químicos
d. Todas las opciones anteriores

¿Con qué frecuencia debe usted inspeccionar su EPP para cerciorar que
está en buena condición y funcionamiento?

a. Antes de cada uso
b. Una vez por semana
c. Una vez por mes
d. Cuando sea necesario

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
You know the right answer?
Ayudenme!!
Cuál de las siguientes afirmaciones es verdadera: (V o F)

- El EPP será...
Questions
question
Spanish, 06.10.2021 20:00
question
English, 06.10.2021 20:00
question
Mathematics, 06.10.2021 20:00
Questions on the website: 13722366