subject
Engineering, 24.03.2020 02:13 eggg65

Carbon dioxide steadily flows into a constant pressure heater at 300 K and 100 kPa witha mass flow rate of 9.2 kg/s. Heat transfer in the rate of 175 kW is supplied to the carbondioxide as it flows through the heater. Determinea) the carbon dioxide temperature at the exit andb) carbon dioxide volume flow rate at the heater exit. Assume constant specific heat, cp, of 1075 J/(kg K).

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
You know the right answer?
Carbon dioxide steadily flows into a constant pressure heater at 300 K and 100 kPa witha mass flow r...
Questions
question
Mathematics, 08.07.2020 15:01
Questions on the website: 13722366