Engineering, 23.03.2020 23:40 JackMonhen
A rectangular steel eyebar 3/4 inches thick and 24 ft long between centers of end pins is subjected to an axial tensile load of 50,000 lb. If this bar must not elongate more than 0.20 inches, calculate
(a) the width of the bar and
(b) tensile stress developed at maxium elongation, using required width calculated in (a)
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:20
Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?
Answers: 2
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
A rectangular steel eyebar 3/4 inches thick and 24 ft long between centers of end pins is subjected...
English, 06.05.2020 09:00
Biology, 06.05.2020 09:01
Physics, 06.05.2020 09:01
Biology, 06.05.2020 09:01
Mathematics, 06.05.2020 09:01
Chemistry, 06.05.2020 09:01
Mathematics, 06.05.2020 09:01
Mathematics, 06.05.2020 09:01
Mathematics, 06.05.2020 09:01
English, 06.05.2020 09:01
Mathematics, 06.05.2020 09:01
English, 06.05.2020 09:01