Engineering, 21.03.2020 09:23 elliecruzriver

A straight wire, labeled as Wire A, lies horizontally on a tabletop and is oriented to run north-south. A conventional current of 1.0 amperes runs in the wire directed towards the north. A second wire, labeled as Wire B, is also laid on the tabletop oriented north-south. Which of the following statements is true? (i) If Wire B carries no current in it and lies to the left (west) of wire A, then it will experience an attractive force to the right (towards wire A). (ii) If Wire B carries a northward conventional current and lies to the left (west) of wire A, then it will experience an attractive force to the right (towards Wire A). (iii) If Wire B carries a northward conventional current and lies to the right (east) of wire A, then it will experience a repulsive force to the right (away from Wire A). (iv) If Wire B carries a southward conventional current and lies to the left (west) of wire A, then it will experience a repulsive force to the left (away from Wire A).

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

Answer

You know the right answer?

A straight wire, labeled as Wire A, lies horizontally on a tabletop and is oriented to run north-sou...

Questions