subject
Engineering, 20.03.2020 22:37 wisal96

A tank is 6 m long, 4 m wide, 4 m high, and contains kerosene with density 820 kg/m3 to a depth of 3.5 m. (Use 9.8 m/s2 for the acceleration due to gravity.) (a) Find the hydrostatic pressure on the bottom of the tank.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
You know the right answer?
A tank is 6 m long, 4 m wide, 4 m high, and contains kerosene with density 820 kg/m3 to a depth of 3...
Questions
question
History, 01.07.2019 11:00
question
Advanced Placement (AP), 01.07.2019 11:00
Questions on the website: 13722366