Engineering, 19.03.2020 07:15 daniboyytusa
A cylinder fitted with aa frictionless piston contains an ideal gas at temperature T and pressire P. The gas exapnds isothermally and reversibly until the pressure is p/3. Ehich statement is true regarding the work done by the gas during expansiona. Equal to the heat absorbed by the gas. b. Equal to the internal energy change of the gas. c Equal to the enthalpy change of the gas. d. Equal to 11 P time the volume change in the gas. e. Greater than the heat absorbed by the gas
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 06.07.2019 02:30
Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.
Answers: 1
Engineering, 06.07.2019 03:20
Avertical steel rod of length 2.0 m and diameter 25 mm is rigidly fixed at its upper end and has a flange at its lower, free, end. what will be the maximum stress produced in the rod when a load of 20 kn is applied, (a) gradually to the lower end, (b) suddenly to the lower end, (c) by a collar falling from a height of 50 mm on to the flange?
Answers: 3
You know the right answer?
A cylinder fitted with aa frictionless piston contains an ideal gas at temperature T and pressire P....
Questions
History, 04.04.2020 08:05
Mathematics, 04.04.2020 08:05
Mathematics, 04.04.2020 08:06
Computers and Technology, 04.04.2020 08:06
Mathematics, 04.04.2020 08:06
