subject
Engineering, 17.03.2020 17:10 lucyfox8165

4 Error-Correcting Polynomials (a) Alice has a length 8 message to Bob. There are 2 communication channels available. When n packets are fed through channel A, the channel will only deliver 5 packets (picked at random). Similarity, channel B will only deliver 5 packets (picked at random), but it will also corrupt (change the value) of one of the delivered packets. All channels can only work if at least 10 packets are sent through it. Using the 2 channels, how can Alice send the message to Bob? (b) Alice wishes to send a message to Bob as the coefficients of a degree 2 polynomial P. For a message [mi, m2,m3], she creates polynomial P- mix^ m2x +m3 and sends 5 packets: (0,P(0)), (1,P(1)), (2,P(2)), (3, P(3)), (4, P(4). However, Eve interferes and changes one of the values of a packet before it reaches Bob. If Bob receives and knows Alice's encoding scheme and that Eve changed one of the packets, can he still figure out what the original message was? If so find it as well as the x-value of the packet that Eve changed, if not, explain why he can not. (Work in mod 1 l.) (c) Alice decides that putting the message as the coefficients of a polynomial is too inefficient for long messages because the degree of the polvnomial grows quite large. Instead, she

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
question
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
question
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
You know the right answer?
4 Error-Correcting Polynomials (a) Alice has a length 8 message to Bob. There are 2 communication ch...
Questions
Questions on the website: 13722362