Engineering, 17.03.2020 00:58 Brandon4188
Two sections of a pressure vessel are to be held together by 5/8 in-11 UNC grade 5 bolts. You are told that the length of the bolts is 1.5 in, the length of the threaded portion of the bolts is 0.75 in, and that their elastic modulus is E=30 Mpsi. The total load on the joint is 36 kip and the stiffness of the members is given as km=8.95 Mlbf/in. What is the minimum number of bolts that should be used to guard against excess proof strength with a factor of safety of np=1.2? Be sure to make an estimate for the preload.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
You know the right answer?
Two sections of a pressure vessel are to be held together by 5/8 in-11 UNC grade 5 bolts. You are to...
Questions
Mathematics, 07.12.2020 16:40
Biology, 07.12.2020 16:40
History, 07.12.2020 16:40
Biology, 07.12.2020 16:40
English, 07.12.2020 16:40
Mathematics, 07.12.2020 16:40
