Engineering, 15.03.2020 11:23 sarinawhitaker

Apply it
Identify the machines in your
school workshop that have
a pulley system as the drive
mechanism. What are the
advantages of using pulleys?
How can different speeds be
achieved?

Answers: 3

Show answers

Answers

To indentify the machines in our school that have a pulley system as the drive mechanism and the advantages of Pulley system is given below

Explanation:

1.A pulley is a wheel with a groove along its edge, that holds a rope or cable. ... When pulleys are used together in this way, they reduce the amount of force needed to lift a load. A crane uses pulleys to help it lift heavy loads. Pulleys are one of the six simple machines.

2.Examples of pulleys include:

Elevators use multiple pulleys in order to function. A cargo lift system that allows for items to be hoisted to higher floors is a pulley system. Wells use the pulley system to hoist the bucket out of the well. Many types of exercise equipment use pulleys in order to function.

3.Using multiple pulleys decreases the amount of force necessary to move an object by increasing the amount of rope used to raise the object. The mechanical advantage (MA) of a pulley system is equal to the number of ropes supporting the movable load.

4.To calculate the mechanical advantage of a pulley you simply have to count the number of rope sections that support whatever object you are lifting (not counting the rope that is attached to the effort). For example, in a one pulley system the MA is 1. ... Therefore your mechanical advantage would be 2 (600/300).

5.The movable pulley is used to reduce the amount of input force to lift a load. The most popular system that uses this pulley would be a well. Unlike the fixed pulley, the movable pulley is attached to the load, and is lifted by pulling up on the rope, making it twice as easier to lift a heavy object.

6.The main benefit of the pulley is that it can actually reduce the amount of force which is required to lift heavy objects and redistributes the direction of the force to lift heavy objects

Answer from: Quest

answer:

explanation:

sbbdbdbdbdbdndjd

Answer from: Quest

answer:

what work

explanation:

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

Answer

You know the right answer?

Apply it
Identify the machines in your
school workshop that have
a pulley system a...