Engineering, 14.03.2020 02:55 gafran
A steel specimen is tested in tension. The specimen is 1.0 in. wide by 0.25 in. thick in the test region. By monitoring the load dial of the testing machine, it was found that the specimen yielded at a load of 12.5 kips and fractured at 17.5 kips. A. Determine the tensile stresses at yield and at fracture. B. Estimate how much increase in length would occur at 60% of the yield stress in a 2-in. gauge length. 3-
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
You know the right answer?
A steel specimen is tested in tension. The specimen is 1.0 in. wide by 0.25 in. thick in the test re...
Questions
Mathematics, 08.01.2021 06:10
Mathematics, 08.01.2021 06:10
Mathematics, 08.01.2021 06:10
English, 08.01.2021 06:10
Mathematics, 08.01.2021 06:10
English, 08.01.2021 06:10
Chemistry, 08.01.2021 06:10
Mathematics, 08.01.2021 06:10
History, 08.01.2021 06:10
Mathematics, 08.01.2021 06:10
Mathematics, 08.01.2021 06:10
Mathematics, 08.01.2021 06:10
History, 08.01.2021 06:10
