Engineering, 13.03.2020 21:19 papoose10and11
Design a buck converter for the following specifications. Specifications: Input Voltage: 100 V Output voltage: 75 V Minimum output power: 250 W Maximum output power: 1500 W Switching frequency: 250 kHz Peak-to-peak inductor ripple current is 1A You may assume that the capacitances are large enough to be ignored in your design, i. e., the capacitor voltages will not change significantly over a single switching period. Your design should respond to disturbances as fast as possible.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
Engineering, 06.07.2019 02:30
Define thermoplastic polymers and thermosetting polymers in terms of their structures, and (ii) describe briefly a process suitable for the production of products from each type of polymer.
Answers: 3
You know the right answer?
Design a buck converter for the following specifications. Specifications: Input Voltage: 100 V Outpu...
Questions
Mathematics, 03.03.2020 01:32
Computers and Technology, 03.03.2020 01:32
