Le Corbusier developed the Domino house system, where the main concept was to:

A. separate the load-bearing structure of the house from the walls, allowing the walls and windows to be located freely
B. allow for the entire house to be disassembled, flat-packed, then shipped anywhere in the world for reassembly
C. enclose the house with mechanically fastened metal panels that could be easily disassembled and moved
D. mechanically stack vertical sheets of concrete so that they formed the exterior envelope of the house, eliminating the need for piers

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.