Considering again the joint of [4], if the bolt is preloaded to 12 kips, and an ultimate external load of 13 kips is applied to the joint, determine (a) the margin of safety against joint separation, and (b) the minimum margin of safety in the bolt if the bolt is a Grade 8 SAE bolt

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan